TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
101. Bend four lock tabs (117) away from eight bolts (116).
116
117
102. Remove eight bolts (116) and four lock tabs (117).
103. Remove cover (118) from carrier assembly (115).
118
104. Use driver and hammer to remove bearing (119).
115
119
394-1301
NOTE
There are two shaft assemblies of this type in carrier. The following disassembly procedure is for one
shaft assembly. The disassembly procedure for the remaining shaft assembly is identical.
Remove spring pin only if inspection indicates replacement is necessary.
105. Use pin punch and hammer to depress spring pin (125) into center of shaft (131).
106. Remove shaft (131) and spring pin (125) from carrier assembly (115).
107. If damaged, remove spring pin (125) from shaft (131).
108. Remove gear (127) and thrust washer (130).
115
109. Use driver and hammer to remove bearings (128 and
120
129).
110. Remove thrust washer (126).
111. Remove gear (121) and thrust washer (124).
112. Use driver and hammer to remove bearings (122 and
121
123).
122
123 124
113. Remove thrust washer (120).
125
126
127
128
129
130
131
394-1302
0373 00-22
