TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
NOTE
There are four shaft assemblies of this type in carrier. The following disassembly procedure is for one
shaft assembly. The disassembly procedure for the remaining three shaft assemblies is identical.
Remove spring pin only if inspection indicates replacement is necessary.
114. Use pin punch and hammer to depress spring pin (132) into center of shaft (139).
115. Remove shaft (139) and spring pin (132) from carrier (115).
NOTE
Remove spring pin only if inspection indicates replacement is necessary.
116. If damaged, remove spring pin (132) from shaft (139).
117. Remove tube (138), gear (134) and thrust washer
132
133
(137).
134
135
118. Use driver and hammer to remove bearings (135 and
136
136).
137
119. Remove thrust washer (133) from carrier (115).
138
115
139
394-1303
120. Remove retaining ring (140) and gears (141 and 142)
140
from planetary assembly.
141
142
394-1304
0373 00-23
