TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
NOTE
There are three shaft assemblies in carrier. The following disassembly procedure is for one shaft assem-
bly. The disassembly procedure for the remaining two shaft assemblies is identical.
Remove spring pin only if inspection indicates replacement is necessary.
132. Use pin punch and hammer to depress spring pin (163)
165
into center of shaft (165).
166
133. Remove shaft (165) and spring pin (163).
167
134. Remove gear (168) and thrust washer (166).
135. Use driver and hammer to remove bearing (167).
168
136. Remove thrust washer (169) from carrier (164).
169
164
163
394-1311
137. Remove 10 short springs (170), five long springs
171
170
(171) and dowels (172) from planetary assembly.
172
138. Remove friction disc (173), clutch plate (174) and
173
friction disc (175).
174
175
PLANETARY
ASSEMBLY
394-1312
0373 00-27
