TM 5-3805-248-23-2
TRANSMISSION PLANETARY REPAIR - CONTINUED
0373 00
DISASSEMBLY - CONTINUED
203
196
156. Remove six bolts (203) and three locks (202).
157. Remove snap ring (196) and gear (197).
197
202
158. Remove hub (198).
198
159. Remove retaining ring (199).
160. Install two 3/8-16NC forcing screws into retaining
199
plate (201).
161. Tighten two 3/8-16NC forcing screws until retaining
200
plate (201) and bearing (200) are free.
162. Use driver and hammer to remove bearing (200) from
201
retainer plate (201).
394-1316
163. Use driver and hammer to remove bearing (204).
164. Remove six bolts (212) and three locks (211).
212
204
165. Install two 3/8-16NC forcing screws in cage (205).
211
166. Tighten two 3/8-16NC forcing screws until cage (205)
205
is free.
167. Remove two 3/8-16NC forcing screws.
168. Remove cage (205), pin (210), carrier (206) and two
206
210
seal rings (207).
169. Remove two dowels (209) from manifold (208).
207
208
209
394-1317
0373 00-30