TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
ASSEMBLY - CONTINUED
63.
Install two dowels (19) in housing (18).
16
64.
Install 12 springs (20), housing assembly (18), 12
17
19
washers (17) and bolts (16) in cylinder assembly (9).
18
18
20
9
394-1475
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Differential lock weighs 85 lb (39 kg).
65.
Attach lifting device to cylinder assembly (9).
66.
Use lifting device to position cylinder assembly (9) on
differential assembly.
67.
Install two bolts (15 and 14)
9
14
15
DIFFERENTIAL
ASSEMBLY
394-1474
.
0376 00-25
