TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
ASSEMBLY - CONTINUED
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Differential lock weighs 85 lb (39 kg).
31.
Attach lifting device to gear assembly (61).
32.
Use lifting device to install gear assembly (61) on
bevel gear assembly (62).
61
33.
Remove lifting device.
62
394-1484
34.
Install eight bolts (58), washers (59) and nuts (60).
Torque bolts to 220 lb-ft (298 Nm).
53
35.
Heat bearing (55) to a maximum of 275F (135C).
54
36.
Lower temperature of bearing (55).
37.
Install new bearing (55), if removed, bearing cup (54)
55
and cage (53).
60
38.
Install bearing cup (56) and cage (57).
59
56
58
57
394-1483
0376 00-20