TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
ASSEMBLY - CONTINUED
11.
Install bearing (90) and new preformed packing (89)
in retainer (85).
89
90
85
394-1492
12.
Install shims (87 and 86), retainer assembly (85) and
six washers (84) and bolts (83).
82
83
84
85
87
86
394-1491
NOTE
Universal puller kit must be installed on
pinion shaft. Use torque wrench to check
amount of torque needed to turn pinion.
Torque of 20 lb-in. (5 Nm) is obtained by
adding or removing shim(s) as required.
13.
Use universal puller kit and torque wrench to adjust
92
pinion (92).
394-1496
0376 00-16
