TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
ASSEMBLY
1.
Install fitting (102), nut (101), connector (99) and tube assembly (100) in carrier (81).
2.
Install slug (98) on pinion gear (92).
3.
Heat bearing (97) to a maximum temperature of 275F (135C).
4.
Install bearing (97).
5.
Heat bearing (96) to a maximum temperature of 275F (135C).
6.
Install bearing (96) on pinion gear (92).
NOTE
Temperature of bearing cups must be lowered before installation.
7.
Lower temperature of bearing (95).
8.
Install bearing (95) and ring (94) on pinion gear (92).
94
95
96
92
394-1495
9.
Lower temperature of bearing (93).
92
10.
Install bearing (93) and pinion gear assembly (92) in
carrier assembly (81).
81
93
394-1494
0376 00-15
