TM 5-3805-248-23-2
DIFFERENTIAL AND BEVEL GEAR REPAIR - CONTINUED
0376 00
DISASSEMBLY - CONTINUED
49.
Remove and discard preformed packing (82).
50.
Remove six bolts (83) and washers (84).
82
51.
Install two forcing screws in holes (88) of retainer
(85).
83
52.
Use two forcing screws (88) to remove pinion gear
84
retainer (85) from carrier (81).
88
85
53.
Remove shims (86 and 87).
54.
Remove two 1/2-13NC forcing screws (88) from pin-
ion gear retainer (85).
87
86
81
394-1491
55.
Remove and discard preformed packing (89).
56.
Use puller assembly to remove bearing (90).
89
57.
Invert retainer assembly (85).
90
85
394-1492
0376 00-12