TM 5-3805-248-23-2
BOWL LIFT CYLINDER REPAIR - CONTINUED
0383 00
ASSEMBLY
WARNING
Prolonged contact with lubricating oil, MIL-L-2105, may cause skin rash. Skin and clothing that come in
contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be
removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a
minimum.
1.
Apply primer to counterbore and metal shell of new
seal (16) and allow to dry (approximately 30 seconds).
12
NOTE
11
Do not allow sealing compound to contact
13
the sealing lip.
2.
Apply sealing compound to counterbore and to metal
shell of new seal (16).
8
8
3.
Coat new gasket (14), new preformed packing (15)
and new seal (16) with clean lubricating oil and install
in head (8).
4.
Coat new ring (13) and new preformed packing (12)
with clean oil and install.
14
15
16
394-1435
5.
Coat new seal (17) and new rings (18 and 19) with clean lubricating oil and install on piston (11).
6.
Install piston (11) assembly on head assembly (8).
0383 00-5
