TM 5-3805-248-23-2
BOWL LIFT CYLINDER REPAIR - CONTINUED
0383 00
ASSEMBLY - CONTINUED
7.
Install head assembly (8) on rod (5).
9
8.
Using torque multiplier, install new nut (9) on rod (5).
Torque nut (9) to 1,200100 lb-ft (1,627136 Nm).
8
5
10
5
394-1434
9.
Use pump group to install bearing (2) in collar (1).
10.
Use an inside micrometer to measure inside diameter
of bearing (2). Diameter must not be less than 2.251
in. (57.175 mm).
11.
Use pump group to install bearing (10) in rod (5).
2
1
12.
Use an inside micrometer to measure inside diameter
of bearing (10). Diameter must not be less than 2.251
in. (57.175 mm).
13.
Coat head assembly (8) with clean oil.
14.
Install collar (1) over head assembly (8).
8
15.
Extend rod (5) to its farthest length of travel.
16.
Install six washers (7) and bolts (6) in head (8).
17.
Install two washers (3) and bolts (4).
1
18.
Torque six bolts (6) and two bolts (4) to 30035 lb-ft.
3
7
4
6
5
394-1433
19.
Install bowl lift cylinders (WP 0242 00).
20.
Operate machine and verify correct operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0383 00-6
