TM 5-3805-248-23-2
EJECTOR CYLINDER REPAIR - CONTINUED
0384 00
DISASSEMBLY
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Place ejector cylinder with holes for hydraulic lines facing down.
Weight of ejector cylinder is 725 lb (329 kg).
1.
Use lifting device to place ejector cylinder on cylinder repair stand.
2.
Remove lifting device.
CAUTION
Exercise care when securing rod to support. Rod must be protected against nicks and scratches. Failure to
follow this procedure could result in damage to equipment.
3.
Extend rod (3) to its farthest length of travel and
secure to support.
4.
Remove six bolts (4) and washers (5).
5.
Remove two bolts (2) and washers (1).
1
2
5
3
4
394-1437
0384 00-2
