TM 5-3805-260-10
Every 500 Service Hours or 3 Months
27
Hydraulic System
Hot oil or components can cause personal injury.
Do not allow hot oil or components to contact skin.
The machine must be level. The bowl must be lowered.
Apply the parking brake. Stop the engine.
1.
Open the hood.
3.
Loosen the cover bolt. Remove the cover and the
filter elements from the tank.
2.
Remove the hydraulic tank fill cap slowly to relieve
pressure.
4.
Wash the cover assembly in clean, non-flammable
solvent. Allow it to dry.
5.
Replace the cover gasket if it is damaged.
6.
Install two new filters and the cover assembly in the
tank. Tighten the cover bolt to 60 “ 5 lb. ft. (80 “ 7N.m).
2-36
WARNING
