TM 5-3805-260-10
4.
Push the button to release the parking brake. Be
sure the button stays in.
Parking Brake:
1.
Operate the engine at low idle. The air pressure
must be in the operating range. Release the emergency
brake. Apply the service brake. Pull the button to apply
the parking brake.
5.
The parking brake actuating rod can be adjusted if
the linings are worn.
5.
Operate the engine at low idle. Raise the bowl.
Release the Service brake. The Emergency brake
should prevent machine movement.
6.
Apply the service brake. Shift the transmission to
NEUTRAL. Apply the parking brake.
7.
Push the button to release the emergency brake.
Be sure it stays in.
2.
Raise the bowl. Move the transmission control to
1st speed.
3.
Release the service brake. The parking brake
should prevent the machine from moving.
4.
Apply the service brake. Shift the transmission to
NEUTRAL. Lower the bowl. Stop the engine.
To adjust the brake, remove the cotter and pin from the
rod end. Turn the rod end counterclockwise to reduce
rod travel. Connect the rod end to the brake with the pin
and cotter.
6.
Have repairs made if the adjustment cannot be
made or any brake system is damaged.
2-32
