TM 5-3805-260-10
(15) Connect the lift cylinder hose lines to the lift
cylinders. Remove the stored connecting pins from
draft frame.
(16) Start the engine and extend the cylinder until
the cylinder blind end aligns with the draft frame pin
connection. Install the pins and STOP THE
ENGINE.
(17) Ejector was strapped to make it immobile
during transport. Remove material used to secure
ejector.
(18) Remove both bolts from the straps on both
side of the hinged ejector.
(19) Fold the ejector up and reinstall the straps.
3-37
