TM 5-3805-260-10
(27)
Move the ejector forward to raise the
steering axle.
WARNING
A slight pressure on ejector control lever must
be manintained to hold the ejector in place.
(28)
Install bolts to secure the steering axle
to the storage brackets. Move ejector back and detach
the lifting equipment. STOP THE ENGINE. Store cables
and pins in tool box. Spring assembly attaches to two
brackets on left side of rear frame.
(29)
Place auxiliary fuel tank in storage
position. Install hold-down strap and J-bolts.
(30)
Remove load transfer arm brackets and
bolts from tractor. Install belly pan and reinstall load
transfer arm bracket to tractor.
3-40
