TM 5-3805-260-24
WATER SEPARATOR
REMOVE WATER SEPARATOR
1.
Drain the water from the separator.
2.
Remove tube assemblies (1) and (2). Put plugs
and caps over all fuel line openings.
3.
Disconnect drain hose (3) from the separator.
4.
Remove clamp (4) and element (5) from the
base.
5.
Remove bolts (7), the nuts and washers to
remove base (6) from the bracket.
INSTALL WATER SEPARATOR
1. Put base (1) in position on the bracket and install
bolts (2), the washers and nuts to hold it.
3-30