TM 5-3805-260-24
WATER SEPARATOR, VALVE COVERS
2.
Put element (4) in position on the base and
install clamp (3) to hold it.
3.
Connect drain hose (7) to the base.
4.
Install tube assemblies (5) and (6).
REMOVE AND INSTALL
VALVE COVERS
1.
Loosen the clamps and remove hose (1) for the
crankcase ventilator valve on the right side.
2.
Remove bolts (3) and valve covers (2) from the
cylinder head.
3.
Put the gasket and valve cover (2) in position on
the cylinder head.
4.
Install bolts (3) that hold the valve covers.
Tighten the bolts to a torque of 10 + 2 lb. ft. (14
+ 3 N m) in the number sequence shown.
5.
Install hose (1) for the crankcase ventilator valve
on the right side and tighten the clamps to a
torque of 20 + 5 lb. in. (2.3 + 0.6 N m).
3-31
