TM 5-3805-260-24
FAN AND FAN DRIVE
INSTALL FAN AND FAN
DRIVE
1.
Put bracket assembly (I) in position on the
timing gear cover and install the bolts and
washers that hold it.
2.
Install vee belts (4) and tighten adjustment nuts
on rod (2) to hold the correct tension on the vee
belts. To get the correct belt tension use a
tension gauge such as Burroughs Tool
Company Part No. BT-33-96-4-16 or an
equivalent. The correct gauge indication is 120
+ 5.
3.
Tighten bolt (3) for the alternator.
4.
Put adapter (5) on the fan drive pulley and
install the bolts and washers to hold it.
5.
Put fan (6) in position and install the bolts and
washers that hold it in position.
end by:
a)
install radiator and torque converter oil
cooler
3-95
