TM 5-3805-260-24
ENGINE
INSTALL ENGINE
Tools Needed
A
8S7620
Base Assembly
1
8S7650
Cylinder
1
8S7615
Pin
1
5P3100
Pump Group
1
1.
Put the lower halves of mount assemblies (1) in
position on the tractor frame.
2.
Put the gasket in position on the torque
converter.
3.
Fasten a hoist to the engine and put it in position
on the tractor frame. Make sure the
gear
teeth
of
the rotating housing in the torque
converter
and
the ring gear on the flywheel are
correctly
engaged before the weight of’ the
engine
is
lowered on the frame.
CAUTION: Do not cause damage to the oil suction bell
assembly on the oil pump when the engine is installed.
4.
Install the two drain hose clips (2), bolts (3) and
the washers that hold the torque converter to the
flywheel housing.
5.
Install the sleeves and upper halves of mount
assemblies (1) in the engine rear supports.
6.
Put brace assembly (4) in position on the left
rear engine mount and install bolts (5) and the
nuts in both engine rear mounts.
3-135
