TM 5-3805-260-24TRACTOR RIM AND TIREREMOVE TRACTOR RIMAND TIRETools NeededA8S7610Base Assembly18S7650Cylinder15P3100Pump Group1I.Loser the scraper and put blocks in front and behind thewheels.2.Put tooling (A) in position and lift the machine as shown.WARNING: Machine can fall off’) of hydraulic jack. Putblocks under the differential housing for support.3.Remove all but one of the nuts that hold the rim to the wheelassembly4.Loosen the last nut approximately .125 in.(3.18WARNING: The tire can fall off of the lift truck. Makesure lake sure the tire is fastened to the lift truck.5.Fasten the tire to a lift truck with a chain as shown6.Remove the last nut that holds the tire in position. Remove therim and tire.’ eight of the rim and tire Is 925 lb.(421 kg).INSTALL TRACTOR RIMAND TIRETools NeededA8S7610Base Assembly18S7650Cylinder15P3100Pump Group11.Fasten the tire to a lift truck ),with a chain as shown.WARNING: Make sure tire is fastened to the lift truck.2.Put the rim and tire in position on the machine.3.Install four nuts that hold the rim to the wheel assembly.4.Remove the chain and lift truck.5.Install the remainder of nuts (I) that hold the rim and tire to the"wheel assembly .Tighten the nuts to a torque of 375 25Ib.ft.(510 35 N m).6.Remove the support blocks from under the differentialhousing.7.Lower the machine to the ground. Remove tooling (A) fromunder the machine.3-149
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
