INSTALL WHEEL ASSEMBLIES, BEARINGS AND SEALS (CONT)

INSTALL WHEEL ASSEMBLIES, BEARINGS AND SEALS - TM-5-3805-260-24_378

INSTALL WHEEL ASSEMBLIES, BEARINGS AND SEALS (CONT) - TM-5-3805-260-24_380

TM-5-3805-260-24 Scraper Tractor: Elevating Self-Propelled 11 Cubic Yard Sectionalized and Nonsectionalized Manual
Page Navigation
350

TM 5-3805-260-24 TRACTOR WHEEL ASSEMBLIES, BEARINGS AND SEALS 11. Heat the u-heel outer bearing cone (4) in oil to a maximum temperature of 275°F (135 C).Install the bearing on the hub assembly. 12. Install the hub assembly in ring gear (6). Install plates (5).the locks and bolts to hold the hub assembly position. 13. Use tool (C) and fasten a hoist to the wheel assemble .Put the , heel assembly in position on the machine. 3-154

Privacy Statement
Press Release
Contact