TM 5-3805-260-24WHEEL BRAKE DISCS, WHEEL SPINDLESREMOVE WHEEL BRAKEDISCSstart by:a) remove wheel assemblies, bearings and seals1.Remove bolts (I).2.Remove disc (2).INSTALL WHEEL BRAKEDISCS1. Put disc (I ) in position on the wheel assembly.2. Install the bolts that hold the disc to the wheel assembly and tightenthem to a torque of 195 20 lb.ft.(265 25 N m).end by:a) install wheel assemblies, bearings and sealsREMOVE WHEEL SPINDLESstart by:a) remove wheel assemblies, bearings and seals1. Remove the bolts that hold spindle ( I ) to the axle housing. Removespindle (I).Weight of the spindle is 40 lb.(18 kg).2.Remove the O-ring seal from spindle (I).INSTALL WHEEL SPINDLES1. Put the O-ring seal on spindle (2).2. Put spindle (2) in position on the axle housing with the oil hole (1) inthe vertical position. Install the bolts that hold the spindle on theaxle housing. Tighten the bolts to a torque of 225 25 Ib.ft.(300 35 N-m).end by:a) install wheel assemblies, bearings and seals3-156
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business