TM 5-3805-260-24
AIR RESERVOIR ASSEMBLY
REMOVE AIR RESERVOIR
ASSEMBLY
WARNING: Open the drain valves on the reservoirs and
make sure all air pressure is removed from the system
before any work is done.
1.
Disconnect hoses (1) through (4) from the front of the
reservoirs. Put identification on hoses for correct
installation.
2.
Disconnect hose (5) from the rear of the reser-
voir.
3.
Put OTC Model 1790 Lo-Lift Transmission Jack (A) in
position under the reservoirs. Remove four bolts (6) from the
reservoir bracket. Remove the reservoir assembly. The
weight
of
reservoir as-
sembly is 63 lb. (29 kg).
INSTALL AIR RESERVOIR
ASSEMBLY
1.
Put the reservoir assembly on the transmission
jack and lift it in position under tractor.
2.
Install the four bolts to hold the reservoir assem-
bly and bracket.
3.
Connect hose (1) at the rear of the reservoir.
4.
Connect hoses (4) and (5) to the tanks. Connect
hoses to the fittings (2) and (3).
3-250
