TM 5-3805-260-24
DIFFERENTIAL AND CARRIER ASSEMBLY (LOCK TYPE)
33.
Assemble the lock group as follows:
a)
Put the three seals in position on piston (35).
b)
Put clean grease on the seals and install pis-
ton (35) in cylinder (36).
c)
Install springs (38) in the piston.
d)
Put housing assembly (37) in position on the
cylinder.
e)
Install the locks and bolts (41). Tighten the
bolts evenly and bend the locks on the bolts.
f)
Put washer (40) and jaw (39) in position in the
cylinder.
g)
Install washer (42) and spacer (43) in cylin-
der (36).
3-246
