TM 5-3805-260-24
(1)
Clearance between ejector and
side of bowl.................. 12 to .75 in. (3 O to 19.1 mm)
NOTE: When one side has .75 in (19.1 mm) clearance,
the other side
must not have more than .50 in. (12.7 mm).
(2)
Clearance between ejector
and floor ....................... 03 to .25 in. (0.8 to 6.4 mm)
(3)
Clearance between door
and floor.........................26 to .76 in. (66 to 19.3 mm)
and floor.........................26 to .76 in. (66 to 19.3 mm)
(4)
Clearance between ejector rear
rollers to guide ...............03 to .19 in. (0.8 to 4.8 mm)
NOTE: When one side has .19 in. (4.8 mm) clearance,
the other side must
not have more than .12 in. (3.0 mm).
(5)
Clearance between door roller
and bowl sides .............. .06 to 18 in (1 5 to 4 6 mm)
NOTE: When one side has .18 in. (4.6 mm) clearance,
the other side must
not have more than 13 in (3.3 mm).
(6)
Torque for nut .... 450±70 Ib.ft. (610 ± 95 N.m)
(7)
Clearance between door and bottom
of bowl side .................. .07 to .25 in. (1.8 to 6.4 mm)
(8)
Clearance at A, B and C between door insert and
guide (9) when door Is closed ........... 00 in. (0 0 mm)
4-11
