TM 5-3805-260-24
WHEEL BRAKE ASSEMBLY
(1) Thickness of disc-
New................................................................ 50 in (12 7 mm)
Minimum permissible thickness (worn) (in area where pad
and disc make contact) ................................ 44 in (11 2 mm)
(2) Torque for bolts with lubricant on threads. 195 - 20 lb ft (265
25 N-m)
(3) Torque for bolts with lubricant on threads ..159 to 175 lb ft
(217 to 240 N-m)
(4) Thickness of lining assembly (including plate).
New ............................................................. 88 In (22 4 mm)
Minimum permissible thickness (worn) ....... 38 In (9 6 mm)
(Measure the lining at both ends because it can wear more
at one end than the other )
(5) (6) Clearance between pin (6) and brake disc must not be
less than 010 in (O 25 mm) If clearance is less than 010 in (O
25 mm), turn bolt (5) counterclockwise one turn slide pin (6)
to get 010 in (O 25 mm) clearance and tighten bolt (5) again
4-14
