TM 5-3805-260-24
SEPARATION OF TRACTOR AND SCRAPER
8.
Disconnect hoses (10) from the right side of the
hitch.
9.
Remove three bolts and clamps (13) from the
draft frame. Remove all but the top bolts from
brackets (I 11) and (12).
10.
Move the oil lines forward and put tooling (A) in
position under draft frame as shown.
11.
Fasten a hoist to the front of the tractor as
shown.
12.
Put blocks under each side of the hitch to keep it
in position when the hitch pins are removed.
13.
Use tool (B) to remove nut (16), the washer and
shims from the lower hitch pin.
NOTE: Keep the shims together for reference at
installation.
14.
Remove bottom vertical pin (14) from the hitch.
Remove thrust washer (15) after a separation of
the machine is made.
4-73