TM 5-3805-260-24
CONNECTION OF TRACTOR AND SCRAPER
Tools Needed
A
B
C
D
2P8288
Gauging Washer
1
8H3390
Nut
1
2P8287
Box Wrench
1
2P8286
Adapter
1
2P8285
Tubular Arm
1
8S7640
Stand
1
8S7611
Tube
1
8S8048
Saddle
1
2
8S7615
Pin
1
8S7630
Stand
2
8S7631
Tube
2
8S7625
Collar
2
8S7650
Cylinder
2
8S7615
Pin
4
8S7645
Hose Group
1
5P3100
Pump Group
1
1.
Install washers (1) in the lower hole of the hitch.
2.
If tooling (C) was installed during the separation,
fasten a hoist to the front of the tractor and
remove the stand.
3.
Put a fork lift truck in position and fasten to the
front of the tractor as shown.
4.
Push the tractor until the hitch and draft frame
are in alignment. Make sure steering links are in
correct position during alignment.
5.
Install top vertical pin (2).
6.
Install retainer (3) and the bolts to the bottom of
the pin.
4-75
