TM 5-3805-260-24
DRAFT FRAME
6.
Remove the bolt (14) and washer from each
side of the bowl.
7.
Fasten a hoist to the draft frame with tooling (A)
and chain as shown. Remove pin (13) from both
sides of the bowl.
8.
Remove the draft frame. The weight of the draft
frame is 2600 lb. (1170 kg).
9.
Remove the bushings from the ends of the draft
frame arms with tooling (B) if necessary.
INSTALL DRAFT FRAME
Tools Needed
A
FT600
Cable Saver
1
1.
If the bearings were removed, lower the
temperature of the bearings to - 500F (-46°C)
and install the bearings to the draft frame arms.
2.
Fasten a hoist to the draft frame with tooling (A)
and chain. Put the frame in position.
3.
Install pin (1) washers, and bolts on both sides
of the bowl.
4-79
