TM 5-3805-260-24ELEVATOR CONTROL VALVE7. Remove two bolts (12) from retainer (13).8. Remove retainer (13) and gasket (14) from thebody.9. Remove seals (15) and (16) from the retainer.NOTE: There is a lockring between seals (15) and (16).The ring can be removed if replacement is necessary.10. Remove two bolts (18) and cover (17). Removethe O-ring seal from the body. Check the condi-tion of the seals. If seal has damage, use newparts for replacement.11. Remove bolts (20) and flange (19) from thebody.12. Install a l/4"-20 NC bolt (21) in plug (22) and pullthe plug out of the body.13. Remove the O-ring seal from the plug. Removethe spring and the valve from the body. Check thecondition of the seals. If seal has damage use newparts for replacement.4-105
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
