TM 5-3805-260-24
ELEVATOR MOTOR
3. Heat bearing (2) in oil to a maximum temperature of 275°F
(135°C) and install it on the shaft.
4. Use tool (B) to install ring (I) to hold bearing (2) on the shaft.
5. Install shaft assembly (3) in the body.
6. Install spiral ring (4) in the groove in the body that holds the
shaft assembly in position.
7. Install ring (6) and O-ring seal (5) on the adapter.
8. Install adapter (7) in the body with ring (6) toward the bearing
on shaft.
4-115
