TM 5-3805-260-24
ELEVATOR CHAIN ASSEMBLY
7. Fasten a hoist to chain and remove chain from bowl. The
weight of the chain assembly is 1300 lb. (585 kg).
INSTALL ELEVATOR CHAIN ASSEMBLY
Tools Needed
A
5P2706
Chain Clamp Assembly
2
NOTE: Use 5P960 Multipurpose Type Grease on bolts and nuts.
1. Put chain in bowl and fasten hoist to flight nearest the chain
separation. Lift the flight and put on sprockets as shown.
Install chain around flight and frame to hold chain.
2. Fasten hoist to other end of chain. Lift the chain to position
shown and fasten tooling (A) to end of chain. Tighten
tooling (A) until the chain link is together.
3. Install pin (1) in the linkage.
NOTE: The flat area on pin and flat area on linkage must be in
alignment for correct installation.
4-117
