TM 5-3805-260-24
ELEVATOR MOTOR
11. Put bearing (19) and shaft (18) on wooden blocks as shown.
Use a soft faced hammer and remove shaft (18) from
bearing (19).
12. Remove washer (21) from the body.
13. Remove the seal and wiper from the body.
ASSEMBLE ELEVATOR MOTOR
Tools Needed
A
B
1P510
Driver
1
1P1859
Pliers
1
1. Install the wiper. Install the lip type seal with tooling (A).
Install the seal until it makes contact with the counterbore in
the body and with the lip of the seal toward the inside of the
body.
2. Install the washer inside the body next to the seal.
4-113
