TM 5-3805-260-24
EJECTOR CYLINDER
4.
Fasten a hoist to the ejector cylinder. Remove the covers
from both sides of the ejector. Remove pin (7) that holds
the cylinder rod to the ejector.
5.
Remove bolts (8) and covers (9) from both sides.
6.
Remove pin (10) from the head end of the ejector cylinder.
Remove the ejector cylinder. The weight of the cylinder is
98 lb. (44 kg).
INSTALL EJECTOR CYLINDER
1.
Fasten a hoist to the cylinder and put in position. Install pin
(I) in the head end of the cylinder.
2.
(2) and the bolts on both sides.
3.
Put the ejector cylinder rod in position and install the pin
and covers that hold the rod to the ejector.
4-167
