TM 5-3805-260-24
EJECTOR CHECK VALVE, EJECTOR CYLINDER
ASSEMBLE EJECTOR CHECK VALVE
1.
Install O-ring seal (3), teflon ring (2) and O-ring seal (I) on
the poppet.
2.
Install poppet and seat inside the housing. Install the
springs and the caps as shown.
REMOVE EJECTOR CYLINDER
1.
Disconnect wire (3) from alarm (1), Remove bolts (2),
fasten a hoist and remove cover assembly. The weight
of the cover assembly is 135 lb. (61 kg).
2.
Put ejector in the forward position and remove four bolts
(4) from the tube assembly and cylinder. Remove the
clamp (5) that holds tube assembly to cylinder.
3.
Disconnect hose (6) from the cylinder.
4-166
