TM 5-3805-260-24
EJECTOR CYLINDER
DISASSEMBLE EJECTOR CYLINDER
Tools Needed
A
B
C
D
E
1P1784
Hydraulic Cylinder Repair
Stand
1
5P3100
Pump Group
1
1P2854
Spanner Wrench
1
2P8343
Torque Multiplier
1
1P851
Spline Adapter
1
1P852
Male Adapter
1
5P3520
Spanner Wrench
1
2P2257
Extension
1
2P2258
Adapter
1
1P2852
Spanner Wrench
1
start by:
a)
remove ejector cylinder
1.
Pull the rod out of the cylinder as shown and put the cylinder in
position on tooling (A).
2.
Install support (I) under the rod.
3.
Fasten a strap (2) around the rod to hold it in position.
4.
Use tool (B) to loosen the head. Remove the head and the rod
from the tube.
5.
Remove the nut from the rod with tooling (C).
6.
Remove piston (4) with tooling (D) from the rod. Remove
spacer (5) and head (3) from the rod.
7.
Use tool (E) to remove the gland assembly from head (3).
4-169
