TM 5-3805-260-24
EJECTOR REAR GUIDE ROLLER
10.Use tool (A) and a press to remove the plug,
bearing and shaft from the roller as shown.
INSTALL EJECTOR REAR
GUIDE ROLLER
Tools Needed
A
B
1P471
Drive Plate
1
1P487
Drive Plate
1
1P774
Seal Guide
1
1.
Use tool (A) and press to install the plug in roller
(1).
2.
Install bearing (2) on shaft (3).
NOTE: Make sure the high side on the bearing is to the
top as shown.
3.
Use tooling (B) and a press to install roller () on
the bearing.
4-161
TM 5-3805-260-24
