TM 5-3805-260-24
EJECTOR
9.
Turn the ejector as shown and remove from the bowl.
The weight of the ejector is 1150 lb. (518 kg).
INSTALL EJECTOR
1.
Fasten a hoist to the lifting eye and install the
ejector in the bowl.
2.
Install rollers (1) on both sides of the ejector.
3.
Slide the ejector to the rear. Put the rear rollers in
their track and install pin (2) in the rod end of ejector cylinder.
4.
Install the cover and the bolts on both sides of the
pin. Remove the wood blocks between the cylinders.
5.
Install rear cover assembly, see INSTALL
EJECTOR CYLINDER.
end by:
a) install elevator
4-157
