TM 5-3805-260-24
EJECTOR FRONT GUIDE ROLLERS
REMOVE EJECTOR FRONT
GUIDE ROLLERS
1.
Move the ejector completely forward.
2.
Remove nut and bolt (3) from bracket (2).
3.
Make the opening in the bracket large enough to
remove roller shaft (4). Remove the shaft from
the bottom. Remove roller (1) off the top of the
bracket.
4.
Remove ring (5) from shaft (6).
5.
Remove expansion plug (7) from top of the roller.
6.
Turn the roller over. Remove seal (8) and bushing
(9) from the roller.
INSTALL EJECTOR FRONT
GUIDE ROLLERS
Tools Needed
A
B
C
1P513
Handle
1
1
1
1P466
Plate
1
1P477
Plate
1
1
1P489
Plate
1
1 P478
Plate
1
1.
Install the bushing in roller (1) with a press and
tooling (A). Push bushing until it makes contact
with counterbore of the roller.
4-158
