MWO 5-2350-262-35-2
NOTE
2. Fill one bottle (7) with solution from Section IV, step a.
2
3
5
4
1
6
11
10
7
9
8
3. Connect black tube (2) on release tether (1) to black connector (4) on lid (6) of FILLED bottle (7).
4. Connect clear tube (11) on release tether (1) to white connector (10) on lid (9) of EMPTY bottle (8).
5. Connect pump (3) to white connector (5) on lid (6) of FILLED bottle (7).
NOTE
Solution will begin to flow into EMPTY bottle to indicate that MCU is flooded.
6. Operate hand pump (5) to fill MCU (1).
1
3
4
5
2
7
6
7. Disconnect MCU (1) from release tether (2).
2-22