AIR HOSES AND TUBES REPLACEMENT - CONTINUED
AIR HOSES REPLACEMENT
Perform following steps to replace each of 30 tractor air hoses. Hoses are connected to adapters, elbows, fit-
tings, and air tubes.
At right-rear of tractor, disconnect hose (1) from
adapter (2) at elbow (3).
Disconnect other end of hose (1) from fitting (4).
Cut tiedown straps and remove screws and hose
clamps to separate each hose from machine.
Remove hose (1) from machine.
Fittings include elbows, adapters, connec-
tors, and O-rings. Discard O-rings when
Remove fittings from machine.
Remove old antiseizing tape and apply new antiseizing tape to male threads of all fittings before connections
Install fittings and new O-rings to machine.
Position hose (1) to machine.
Connect hose (1) to fitting (4).