FUEL PUMP, HOSES, AND TUBES REPLACEMENT
THIS WORK PACKAGE COVERS
Fuel Pump Replacement; Fuel Hoses Replacement; Fuel Tubes Replacement
Machine parked on hard, level surface (TM 5-3800-
Tools and Special Tools
Scraper bowl lowered to ground (TM 5-3800-205-
Shop equipment, common no. 1 (Item 24, WP 0048
Parking brake applied (TM 5-3800-205-10-1)
Wheels chocked (TM 5-3800-205-10-1)
Battery disconnect switch in OFF position (TM 5-
Rear compartment access door opened (TM 5-
Fuel shutoff valves closed (TM 5-3800-205-10-1)
O-ring (as required)
Do NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite, causing damage to machine and injury to death
Cap all hoses, tubes, and fittings to prevent fluid loss and contamination of fuel system.
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable
containers before opening any compartment or disassembling any component containing flu-
Dispose of all fluids according to local regulations and mandates.
Tag all hoses and tubes to aid in installation.