TM 5-3805-260-24
TORQUE CONVERTER
9. Disconnect hose assemblies (13) and (14) and remove the
temperature sending unit (15) from the torque converter.
10. Install a 5/8- 11 NC forged eyebolt in the top of the
torque converter and fasten a hoist.
11. Remove bolts (16) and lower the torque converter to the
floor. Weight of the torque converter is 250 lb.(113 kg).
INSTALL TORQUE CONVERTER
1. Put the torque converter in position under the machine.
2. Install a 5/8"- 1 NC forged eye bolt in the top of the torque
converter and fasten a hoist.
3. Install the gasket and lift the torque converter into position
on the machine.
4. Install the bolts that hold the torque converter to the
flywheel housing.
5. Install the bolts that hold upper drive shaft (I) to the torque
converter and tighten to a torque of 45 5 lb.ft.(60 7 N
m).
3-158