TM 5-3805-260-24
DIFFERENTIAL LOCK VALVE
DISASSEMBLE AND ASSEMBLE DIFFERENTIAL LOCK
CONTROL VALVE
1. Remove washer (1) and lockwasher (2).
2. Remove exhaust valve assembly (3).
3. Remove plunger guide (4).
4. Remove plunger (5) from guide (4). Inspect seal (6) for
damage or excessive wear; replace if necessary.
5. Remove fitting (7) and seal (8), spring (9), and valve (10).
Inspect sealing surfaces of valve (10) for nicks or
excessive wear; replace valve as necessary.
6. Remove spool (11) from the valve body (12).
7. Remove seal (13) from spool (11).
8. Remove spring (14).
9. To assemble valve, install spring (14), seal (13), and spool (
11).
10. Install seal (6), plunger (5). and guide (4) in valve body (1
2).
11. Install valve (10), spring (9), seal (8), and fitting (7).
12. Install and tighten exhaust valve (3).
3-284