TM 5-2350-377-13&P
FIELD MAINTENANCE
TROUBLESHOOTING PROCEDURES - FRONT CORNER (LEFT OR RIGHT) DOES NOT RAISE OR LOWER IN
UNSPRUNG MODE, TRACK ADJUSTING CYLINDER
INITIAL SETUP:
Tools and Special Tools
References (cont.)
Tool Kit, General Mechanic's: Automotive
TM 5-2350-262-10
(WP 0071, Table 1, Item 7)
Parts Kit, Hydraulic (WP 0071, Table 1, Item 4)
Personnel Required
Construction Equipment Repairer, 91L (Two)
Equipment Condition
References
Hydraulic pressure relieved (TM 5-2350-262-20)
TROUBLESHOOTING PROCEDURE
HYDRAULIC INSTALLATION
WARNING
High pressure is present in the M9 ACE hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each of the
hydraulic control levers is moved several times through all positions, and the hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe injury
to personnel.
0014-1
03/15/2011Rel(1.8)root(tswp)wpno(T00006)
