TM 5-2350-377-13&P
FIELD MAINTENANCE
TROUBLESHOOTING PROCEDURES - TRACK (LEFT OR RIGHT) WILL NOT TIGHTEN OR LOOSEN, TRACK
ADJUSTING CYLINDER
INITIAL SETUP:
References (cont.)
Tools and Special Tools
TM 5-2350-262-10
Tool Kit, General Mechanic's: Automotive
(WP 0071, Table 1, Item 7)
Chain Assembly (WP 0071, Table 1, Item 2)
Parts Kit, Hydraulic (WP 0071, Table 1, Item 4)
Shop Equipment, Field Basic
(WP 0071, Table 1, Item 5)
Personnel Required
Equipment Condition
Construction Equipment Repairer, 91L
Hydraulic pressure relieved (TM 5-2350-262-20)
References
TROUBLESHOOTING PROCEDURE
HYDRAULIC INSTALLATION
WARNING
High pressure is present in the M9 ACE hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each of the
hydraulic control levers is moved several times through all positions, and the hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe injury
to personnel.
0013-1
03/15/2011Rel(1.8)root(tswp)wpno(T00005)
