TM 5-2350-377-13&P
FIELD MAINTENANCE
TRACK AND BLADE MANIFOLD ASSEMBLY FITTINGS REPLACEMENT
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer, 91L
Tool Kit, General Mechanic's: Automotive
(WP 0071, Table 1, Item 7)
Parts Kit, Hydraulic (WP 0071, Table 1, Item 4)
Equipment Condition
Right, center, and left rear floor plates removed
(TM 5-2350-262-10)
Materials/Parts
Hydraulic system pressure relieved
Lubricating Oil, Engine OE/HDO-10
(TM 2350-262-20)
(WP 0070, Table 1, Item 18, 19, 20)
Hydraulic hoses removed (WP 0042)
Cleaning Compound, Solvent
(WP 0070, Table 1, Item 6)
REMOVAL
1.
Remove ten control box power harness connectors (Figure 1, Item 2) from coil connectors (Figure 1, Item 1).
2.
Remove tee (Figure 1, Item 7), reducer (Figure 1, Item 8), and tee (Figure 1, Item 9) from elbow
(Figure 1, Item 6) on track and blade manifold (Figure 1, Item 3), port T.
3.
Remove elbow (Figure 1, Item 6) from track and blade manifold (Figure 1, Item 3), port P.
4.
Remove two straight adapters (Figure 1, Item 4) from tee (Figure 1, Item 5).
5.
Remove tee (Figure 1, Item 5) from track and blade manifold (Figure 1, Item 3), port BR.
6.
Remove straight adapter (Figure 1, Item 4) from track and blade manifold (Figure 1, Item 3), port BL.
2
1
3
9
4
8
6
5
6
7
M0081HBF
Figure 1. Track and Blade Manifold Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00016)
