TM 5-2350-377-13&P
0043
INSTALLATION
NOTE
Steps 1 through 5 apply to both cylinders.
1.
If new cylinder, install lubrication fitting (Figure 4, Item 1) and plug (Figure 4, Item 7) on fixed end of hydraulic
track adjusting cylinder (Figure 4, Item 6), so that lubrication fitting (Figure 4, Item 1) faces forward and ports
(Figure 4, Items 4 and 5) face upward.
2.
If new cylinder, remove plug (Figure 4, Item 3) and install lubrication fitting (Figure 4, Item 2) on rod end of
hydraulic track adjusting cylinder (Figure 4, Item 6) so that lubrication fitting (Figure 4, Item 2) faces rearward.
1
2
3
4
5
6
7
M0076HBF
Figure 4.
Track Adjusting Cylinder Installation.
NOTE
Coat threads of screw and nut with engine lubricating oil prior to installation.
Screw must be inserted from bottom when connecting fixed end of cylinder to hull.
3.
With ports (Figure 5, Items 4 and 6) pointing up, connect fixed end of hydraulic track adjusting cylinder
(Figure 5, Item 5) to hull mounting bracket (Figure 5, Item 7) with pin (Figure 5, Item 1), washer
(Figure 5, Item 3) screw (Figure 5, Item 8), washer (Figure 5, Item 3), and new locknut (Figure 5, Item 2).
1
2
3
4
5
6
7
3
8
M0077HBF
Figure 5. Track Adjusting Cylinder Rod End Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00015)
