TM 5-2350-377-13&P
0042
INSTALLATION - Continued
NOTE
Be sure to install blade folder hose, from top flow valve, port 2, through top access hole in
hull and to top apron hose.
4.
Route two blade folder hoses (Figure 9, Item 10) from inside to outside vehicle through access holes in hull
as shown in (Figure 9, Item 11).
5.
Install adapter and O-ring (Figure 9, Item 9) and quick-disconnect coupler (Figure 9, Item 12) to blade folder
hose (Figure 9, Item 10).
6.
Install adapter O-ring (Figure 9, Item 9) and quick-disconnect coupler (Figure 9, Item 8) to blade folder hose
(Figure 9, Item 10).
7.
Connect blade folder hose (Figure 9, Item 10) to apron hose (Figure 9, Item 13) from top hole on apron
(Figure 9, Item 6).
8.
Connect blade folder hose (Figure 9, Item 10) to apron hose (Figure 9, Item 7) from bottom hole on apron
(Figure 9, Item 6).
NOTE
Make sure apron hoses have minimum slack between clamps and apron when apron is in
down position.
9.
Secure apron hoses (Figure 9, Items 7 and 13) with two clamps (Figure 9, Item 4), one flat washer
(Figure 9, Item 3), new lockwasher (Figure 9, Item 2), and screw (Figure 9, Item 1) to boss (Figure 9, Item 5).
1
2
3
4
6
9 12 13
11 10
5
7
8
10
9
M0072HBF
Figure 9. Blade Folder and Apron Hoses Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install floor support (TM 5-2350-262-20).
2.
Install hull access covers (TM 5-2350-262-20).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00014)
